NEONAIL Invisible Flexi Flexi Tips

NEONAIL Invisible Flexi Tips provide a practical base for hassle-free nail extensions. These pre-shaped tips are designed to cover the entire nail and, thanks to their transparent nature, blend harmoniously with the nail bed. They are easy to apply, as the tips already have a modern, oval shape and are ready to use straight away. Their structure ensures good adhesion to UV gel polishes, resulting in a smooth and neat finish. Thanks to the ten different sizes included in the pack, you can find the right shape for every nail. The matt finish on the inside of the tips enhances the gel’s adhesion and ensures a secure hold. This creates an even base for creative nail designs characterised by their clear appearance.

• Pre-shaped tips in a modern, oval shape
• Transparent design for a natural look
• Matt finish on the inside for improved adhesion
• Suitable for use with UV gel polishes
• Set of 300 pieces in 10 different sizes

1. give the nails their final shape with a 180 grit file (short - approx. 1 mm). Carefully matt the nail plate with a polisher (remember to remove only the shine without damaging the plate).

2.
2. carefully push back the cuticle with a wooden stick. If necessary, cut the cuticle with pliers or scissors.


3. choose the right size of invisible flexi tips - remember to cover the sides of the nail. Then wipe it with a cotton pad with a C-Leaner from underneath. Leave the tips prepared for application in this way.


4. degrease your nails with a cotton pad soaked in cleaner. Then apply it to the natural nail of Nail Prep and wait a few seconds for the product to evaporate.


5. apply a thin layer of primer to increase the adhesion of the product. Wait a few seconds for the liquid to evaporate.


6. apply a thin layer of FlexiTips Base to the natural nail and cure in the LED lamp according to the table. If your nails are flat, you can gently build them up with the FlexiTips Base.


7. apply a thin layer of FlexiTips Base directly to the cuticle tips, at the length that corresponds to your nail. Apply the product as close to the cuticle as possible, remembering to do this from the cuticle to the free edge. This will help you avoid air contamination.


8. hold the tip steady on the nail plate and cure for about 15-30 seconds under the FlexiTips LED lamp. Then place your hand in the LED lamp and cure according to the table.


9. after removing the nails from the lamp, wipe them with a C-Leaner from underneath and then give them the desired shape. You can now shorten them with a 100/180 grit file or a router.


10. then carefully matt the surface of the tip with a cleaning pad and wipe it with a cotton pad soaked in cleaner.


11. apply the selected colour of UV gel polish and cure it in the LED lamp according to the table


13. finally, apply the selected top coat and cure in the LED lamp according to the table. If necessary (the top has a dispersion layer), wipe the nails with cleaner.